The Riser piece comes as an ‘L’ shape and is installed directly on top of your cabinetry to create a door flush finish. The overall height of the DFR is 4.5”.
The length is 96” and can be cut down as required.
Need to calculate the total length and returns of all your upper cabinets to ensure you sufficient pieces are ordered.
|
GABLE CODE |
WIDTH INCH |
|
LENGTH INCH |
|
THICKNESS INCH |
|
DFR04.5-96.0.75 |
04.5 |
X |
96 |
X |
3 |
FK05.5-96.0.75
C-F15-MAP
CLEANING GUIDELINES
A soft microfiber cloth dampened with warm water is usually sufficient to clean your cabinets. If a more thorough cleaning is required, you may use a fresh solution of dishwashing liquid mixed with warm water. After cleaning with a damp cloth, dry immediately using another clean and dry microfiber cloth.
SPLATTERS & SPILLS
Clean spills and splatters immediately. Prolonged exposure to spills, such as food, water, oil or grease splatters and other liquids can cause permanent discoloration or damage to your cabinets.
REGULAR DUSTING
Use a clean, soft, lint-free microfiber cloth for regular dusting. Packaged dusting sheets are not required or recommended. Do not use pre-moistened dusting sheets or aerosol products made for dusting.
WAXING & POLISHING
Waxing is not required or recommended. Over time, waxing and polishing compounds may build up on the surface of your cabinets and cause a hazy, streaky or yellowed appearance which is very difficult to remove.
PRODUCTS TO AVOID
Be sure to avoid the following cleaning products as they may cause damage to your cabinetry:
Harsh detergents, strong soaps, abrasive cleaning products such as tub and sink cleansers, scouring powder/pads, steel wool or self-polishing waxes.
Items are individually wrapped using heavy duty shrink wrap.
All finished surfaces are protected in foam and cardboard corner protection and then wrapped in heavy duty stretch wrap.
You can order your new kitchen or bathroom cabinets and have them delivered free of charge within 3 to 5 days (conditions apply).
